HSY Product Series | PangoMicro FPGA Product Line Overview (2026)
From Compa CPLD to 100-million-gate Titan-3 FinFET, PangoMicro has built a complete FPGA portfolio covering 8 product families and 5 process platforms. This article details each series, representative parts, application scenarios, and Hengsen Technology's value as an authorized distributor.
Company Snapshot: A 12-Year Run to China's FPGA Leadership
Shenzhen Pango Microsystems (PangoMicro), founded in 2013 with investment from Tsinghua Unigroup and other backers including Shenzhen Capital Group and Hillhouse Capital, has emerged as one of China's leading FPGA design houses. The company filed for IPO tutoring in 2025, positioning itself among the first wave of domestic FPGA vendors to seek public-market capital.
Over twelve years, PangoMicro has built production capacity across five process platforms — 55nm eFlash, 40nm, 28nm, FinFET, and FinFET+ — and the Titan-3 PG3T1300 / PG3T1500 devices launched in 2026 mark China's first 100-million-gate FPGA in volume production. Across the portfolio, PangoMicro now fields eight product families — Compa, Logos, Logos-2, Titan-2, Titan-3, Kosmo-2, Kosmo-3, and Visto-3 — making it the broadest FPGA linecard among Chinese vendors.
Portfolio Overview: From CPLD to 100M-Gate Heterogeneous SoPC
Compa Series: Low-Density CPLD/FPGA for Industrial Glue Logic
The Compa series covers low-density programmable logic from 1K to 10K LUT4, the traditional stronghold for industrial control, I/O expansion, and signal-bridging applications.
- Representative parts: PGC1K, PGC2K, PGC4K, PGC7K, PGC10K
- Typical applications: industrial control board I/O expansion, motor drive signal processing, legacy interface voltage translation, consumer electronics control boards
- Process platform: 55nm eFlash
Logos Series: Cost-Effective 12K–100K LUTs
The Logos series sits in the low-to-mid density sweet spot, balancing performance and price. It is one of PangoMicro's highest-volume lines.
- Representative parts: PGL12G, PGL18G, PGL22G, PGL22GS, PGL25G, PGL50G, PGL50H
- Typical applications: video image processing (image stitching, display drivers), industrial communication (Industrial Ethernet, serial expansion), mid- to low-end motor control, consumer video products (projectors, LED controllers)
- Process platform: 40nm / 28nm
Logos-2 Series: Performance Step-Up 25K–200K LUTs
Logos-2 takes the Logos platform to the next process and performance tier, directly competing with Xilinx Spartan-7 and Intel Cyclone V in the mid-density segment.
- Representative parts: PG2L25H, PG2L50H, PG2L50M, PG2L100H, PG2L100HX, PG2L200H
- Typical applications: high-speed video interfaces (MIPI, HDMI, DisplayPort), industrial bus protocols (EtherCAT, Profinet), automotive electronic auxiliary control
Titan-2 Series: High-End 70K–390K LUTs on Advanced Nodes
Titan-2 targets high-end FPGA workloads at 70K–390K LUTs, addressing communications, video processing, and automotive high-bandwidth scenarios.
- Representative parts: PG2T70H, PG2T160H, PG2T390H, PG2T390HX
- Typical applications: optical-module high-speed interfaces, 5G base stations, machine vision, industrial cameras, medical imaging, automotive intelligent cockpits
- Reference design: the X-Vision picture-quality co-processor jointly released with XGIMI in April 2026 is built on Titan-2 (28nm, 390K LUTs)
Titan-3 Series: FinFET 100M-Gate FPGA — A Domestic Milestone
Titan-3 is PangoMicro's 2025–2026 flagship line, using FinFET process with up to 1300K LUTs — currently the only 100-million-gate FPGA with fully domestic intellectual property in volume production.
- Representative parts: PG3T500, PG3T1300, PG3T1500
- Typical applications: data center high-speed interfaces, AI inference acceleration, network switching equipment, high-end industrial control
- Recognition: PG3T500 won the 20th "China Chip" Outstanding Technology Innovation Product Award in November 2025
- Reference platform: the PCIe 4.0 x8 accelerator card announced in May 2026 is built on PG3T1300 with four 25G optical ports, targeting AI inference and data center offload
Kosmo-2 / Kosmo-3 Series: Heterogeneous Multi-Core SoPC
The Kosmo family integrates CPU + FPGA + (NPU) into a single SoPC, targeting edge compute gateways and on-device AI.
- Kosmo-2: dual-core Arm Cortex-A53 plus FPGA fabric; representative parts PG2K100 and PG2K400 — suited to industrial control hosts and edge gateways
- Kosmo-3: CPU + FPGA + NPU heterogeneous architecture for on-device AI inference
Visto-3 Series: Ultra-Large-Scale FPGA in Development
Visto-3 is PangoMicro's in-development ultra-large FPGA line, aimed at EDA emulation acceleration, SoC prototyping, and hyperscale data center workloads, with phased rollout expected to begin around 2027.
Process Platforms and Toolchain
- Process nodes: 55nm eFlash (Compa / Logos), 40nm (Logos), 28nm (Logos-2 / Titan-2), FinFET (Titan-3), FinFET+ (Visto-3)
- EDA toolchain: PDS (Pango Design Suite) — PangoMicro's proprietary toolchain covering synthesis, place-and-route, timing analysis, and bitstream generation with Verilog / VHDL / SystemVerilog input
- Soft-core ecosystem: RISC-V soft-core IP via the joint XuanTie (T-Head) RISC-V ecosystem partnership announced in March 2026; Kosmo series integrates Arm Cortex-A53 hard cores
- High-speed interfaces: PCIe 4.0, 25G / 50G SerDes, HDMI 2.1, MIPI CSI-2 / DSI, DDR4 / LPDDR4
Application Landscape
- Communications: optical modules, 5G / 6G base stations, network switching equipment; the May 2026 PG3T1300 accelerator card integrates four 25G optical ports
- Industrial control: servo drives, PLCs, industrial cameras, motion controllers; PangoMicro won Inovance Technology's "Best Service Award" in 2025
- Data center: PCIe 4.0 accelerator cards plus the edge-large-model inference appliance announced in May 2026
- Automotive electronics: intelligent cockpit, ADAS assistance, intelligent driving domain controllers
- Video and imaging: the X-Vision picture-quality chip co-developed with XGIMI in April 2026 targets projectors and high-end displays
- Consumer electronics: security surveillance and video conferencing terminals
HSY Perspective: How a Distributor Empowers Customers
As a PangoMicro authorized distributor with over a decade of FPGA channel experience, Hengsen Technology (恒森科技) supports customers across the full lifecycle from selection to mass production:
- Full linecard coverage: authorized to distribute Compa, Logos, Logos-2, Titan-2, Titan-3, and Kosmo-2, enabling precise device recommendations against customer budget and performance requirements
- Selection and solution consulting: technical consulting spanning function definition and device selection, backed by Hengsen engineering plus direct access to PangoMicro factory FAE
- Reference design support: PDS toolchain training plus reference designs for typical applications including industrial cameras, optical modules, and video processing
- Mass-production inventory: spot stock on common SKUs and scheduled production coordination for large orders to support industrial-customer delivery schedules
- Ecosystem bridging: connecting customers with PangoMicro's ecosystem partners, including the XuanTie RISC-V alliance and the XGIMI imaging collaboration
For customers evaluating domestic FPGA alternatives to Xilinx and Altera, PangoMicro's 2026 portfolio covers the entire range from low-end glue logic to 100-million-gate heterogeneous SoPC. Hengsen Technology works alongside the factory to carry customers through sample evaluation, schematic design, PCB implementation, and volume ramp.
Content compiled from the PangoMicro official website product center, the May 2026 "Golden Window for Domestic FPGA" press release, customer collaboration announcements from 2025–2026, and Hengsen Technology distributor information. Contact Hengsen Technology for further detail.